Views: 166 Author: Site Editor Publish Time: 2023-08-25 Origin: Site
The commonly used specifications and sizes of aluminum plates are: the thickness is 0.15mm to 500mm, the width is 100mm to 2000mm, and the length is 1000mm to 9000mm.
The application fields of aluminum sheet are:
1. Lighting
2. Solar reflector
3. Building appearance
4. Ceiling, wall, etc.
5. Furniture, cabinets
6. Signs, nameplates, bags
7. Car interior and exterior decoration
8. Mechanical parts processing, etc.
The cleaning steps of the aluminum plate are:
1. Rinse the surface of the board with plenty of water
2. Gently wipe the surface of the test panel with a soft cloth soaked in water-diluted detergent
3. Rinse the surface of the board with plenty of water to wash away the dirt
4. Check the surface of the board, and use detergent to clean the places that have not been cleaned
5. Rinse the surface of the board with clean water until all the detergent is washed away.
What are the commonly used aluminum plate specifications
Thickness: 0.15mm-500mm, width: 100mm-2000mm, length: 1000mm-9000mm thickness: 0.05mm-15mm, width: 15mm-2000mm thickness: 0.3mm-0.9mm width: 500mm-1000mm length: unlimited thickness : 1mm-10mm Width: 1000mm-1500mm Length: 2000-3000mm,
What are the commonly used aluminum plate specifications
There are many specifications of aluminum-plastic panels, and they can also be divided into indoor and outdoor aluminum-plastic panels. Usually, the specifications of aluminum-plastic panels are as follows:
1. The commonly used thickness is 4mm, the thickness of the aluminum skin on both sides is 0.4mm and 0.5mm, and the coating is fluorocarbon coating.
2. The standard size is: 1220*2440mm, its width is usually: 1220mm, the conventional one is 1250mm, 1575mm and 1500mm are its width, and now there are also 2000mm wide aluminum-plastic panels.
3. 1.22mm*2.44mm, the thickness is 3-5mm, of course, it can also be divided into single-sided and double-sided. In short, there are many specifications and classifications of aluminum-plastic panels, but the most common ones are the above.